1
Introduction
Audyssey Installer-Ready Products support professional calibration using the MultEQ
®
Pro PC
application and the Audyssey Installer Kit. Installers bring the Installer Kit and a laptop to an
installation site, run the MultEQ Pro application, perform measurements, and transfer
MultEQ XT filters from the laptop to the Audyssey Installer-Ready Product. The steps for
completing this installation are described in detail in this User Guide.
Getting Started
• Register on the Audyssey Installer Website to get the latest software and documentation.
See the appendix, Register on the Audyssey Installer Website (Page 37).
• Install the MultEQ Pro software on the computer to be used for calibration before going to
the job. See Software Installation and Configuration (Page 4).
• Purchase a license key for the product, if required. See Licenses and License Keys (Page
13).
Important Safety Precautions
Please review the product’s owner’s manual in detail to ensure safe operation before calibrating
with MultEQ Pro.
• Do not cascade other devices between the microphone preamp and the Audyssey Installer-
Ready Product. Permanent damage may occur to each piece of equipment.
• Do not connect the calibrated microphone to the product’s microphone input until
instructed. Doing so before passing the Product Selection screen (Page 12), could cause
microphone feedback at levels that will damage the speakers.
Audyssey Technologies Supported by MultEQ Pro
• Setup – MultEQ Pro measures the speaker system and calculates trims, delays, and
suggested bass management settings based on the in-room acoustic response.
• MultEQ XT– This technology automatically customizes your home theater system to
overcome the acoustical problems specific to your room. An optimized audio system
provides the most clear and balanced sound possible. It is the basis for the rest of
Audyssey’s technologies. http://www.audyssey.com/technologies/multeq
• Dynamic EQ – As the volume is turned up or down, Audyssey Dynamic EQ maintains
consistent bass response, tonal balance, and surround
impression. http://www.audyssey.com/technologies/dynamic-eq
• Dynamic Volume – This technology controls volume levels to eliminate spikes and raise
soft dialog for more enjoyable television and movie
viewing. http://www.audyssey.com/technologies/dynamic-volume
• Audyssey DSX (Dynamic Surround Expansion) – Delivering 7.1, 9.1 and 11.1 surround
sound to your home theater. Audyssey DSX expands surround sound beyond 5.1 with more
speakers for an incredibly immersive and realistic home theater
experience. http://www.audyssey.com/technologies/dsx
To Next Page
Loading...