3
USB to RS232 Serial Cable
Audyssey Installer-Ready Products with RS232 communication may be
connected to the laptop running the MultEQ Pro application using this
cable. If the laptop already has an RS232 serial communication port, a
standard RS232 cable (not supplied) may be used.
Audyssey Installer-Ready Products with USB communication may be
connected to the laptop using the 10 ft. USB cable.
A longer cable (up to 16ft.), repeating extension cable or USB-over-
CAT5 adapter set may be substituted if the laptop must be situated
farther than 10 feet from the Audyssey Installer-Ready Product.
Previous Installer Kits
Items from previous versions of the Audyssey Installer Kit, such as the Audyssey MM01 Professional Calibration
Microphone, can still be used for calibration with newer versions of MultEQ Pro as long as the microphone calibration
file is copied into the new MultEQ Pro installation folder.
To Next Page
Loading...
