Autel MaxiSys ADAS - Page 32

25
perform further diagnosis and other test activities. A Function Menu screen
shall then display.
Functional Buttons
The table below provides a brief description of the Functional Buttons’
operations in Auto Scan:
Table 4-2 Functional Buttons in Auto Scan
Name
Description
Back
Returns to the previous screen or exit Auto Scan.
Pause
Suspends scanning and changes to show the
Continue button.
OK
Confirms the test result, and continues system
diagnosis after selecting the required system by
tapping the item in the Main Section.
Quick
Erase
Deletes codes. A warning message screen will display
to inform you of possible data loss when this function
is selected.
Report
Displays the diagnostic data in the report form.
Save
Saves the diagnostic session as a history record, this
allows you to quickly restore access to the test
systems.
Control Units
This option allows you to manually locate a required control system for testing
through a series of choices. Simply follow the menu driven procedure, and
make proper selection each time; the program will guide you to the diagnostic
function menu after a few choices you’ve made.