29
1. Tap Erase Codes from the Function Menu.
2. A warning message displays to inform you of data loss when this function
is applied.
a) Tap Yes to continue. A confirming screen displays when the operation is
successfully done.
b) Tap No to exit.
3. Tap ESC on the confirming screen to exit Erase Codes.
4. Check the Read Codes function again to ensure the operation is
successful.
Live Data
When this function is selected, the screen displays the data list for the selected
module. The data available for any control module varies by vehicle. The
parameters display in the order that they are transmitted by the ECM, so
expect variation among vehicles.
Gesture scrolling provides quick viewing of the data list. Touch the screen and
drag your finger up or down to reposition the parameters being displayed if the
data populates more than one screen. The figure below displays a typical Live
Data screen:
Figure 4-6 Sample Live Data Screen
1. Diagnostics Toolbar Buttons – tap the drop-down button at the top
center of the screen displays the toolbar buttons. See Table 4-1
Diagnostics Toolbar Buttons on page 18 for detailed descriptions of the
operations for each button.
2. Main Section
To Next Page
Loading...
