LWEIGHT
Sets the current lineweight, lineweight display options, and lineweight units
Format menu: Lineweight
Shortcut menu: Right-click the Lwtbutton on the status bar and choose
Settings.
Command line: lweight (or 'lweight for transparent use)
The Lineweight Settings Dialog Box is displayed.
If you enter -lweight at the Command prompt, LWEIGHT displays LWEIGHT
Command Line.
Lineweight Settings Dialog Box
Format menu: Lineweight
Shortcut menu: Right-click the Lwtbutton on the status bar and choose
Settings.
Command line: lweight (or 'lweight for transparent use)
Sets the current lineweight, sets the lineweight units, controls the display and
display scale of lineweights in the Model tab, and sets the DEFAULT lineweight
value for layers. For a table of valid lineweights, see “Overview of Lineweights”
in the User’s Guide.
632 | Chapter 13
To Next Page
Loading...