Autodesk AUTOCAD 2006 - Menu; Menuload; Load;Unload Customizations Dialog Box

Block
Places blocks at a specified interval along the selected object.
Enter name of block to insert: Enter the name of a block currently defined in the
drawing
Align block with object? [Yes/No] <Y>: Enter y or n or press ENTER
If you enter y, the block is rotated about its insertion point so that its
horizontal lines are aligned with, and drawn tangent to, the object being
measured. If you enter n, the block is always inserted with a 0 rotation
angle.
Specify length of segment:
After you specify the segment length, the block is inserted at the specified
interval. If the block has variable attributes, these attributes are not included.
MENU
Loads a customization file
Command line: menu
The Select Customization File dialog box (a Standard File Selection Dialog
Boxes) is displayed. Enter or select a customization file name. When you press
ENTER or choose Open, the named file is loaded.
A customization file is an XML-based file containing the menus, toolbars, tool
palettes, and other interface elements that you can customize.
You can create a customized menu file and use MENU or CUI to load the file.
MENULOAD
Loads partial menu files
Command line: cuiload
The Load/Unload Customizations Dialog Box is displayed.
Load/Unload Customizations Dialog Box
Command line: cuiload
Controls the display of customization groups and interface elements.
Load/Unload Customizations Dialog Box | 655