NETLOAD
Loads a .NET application
Command line: netload
The Choose .NET Assembly dialog box, a Standard File Selection Dialog Boxes,
is displayed.
NEW
Creates a new drawing
File menu: New
Command line: new
The behavior of the NEW command is determined by the Startup setting on
the System Tab (Options Dialog Box) in the Options dialog box.
■ Show the Startup Dialog Box: NEW displays the Create New Drawing Dialog
Box.
■ Do Not Show the Startup Dialog Box: NEW displays the Select Template dialog
box (a Standard File Selection Dialog Boxes).
If the FILEDIA system variable is set to 0 instead of 1, a NEW Command Line.
If you set FILEDIA to 0, this prompt is displayed regardless of the Startup
setting.
Create New Drawing Dialog Box
File menu: New
Command line: new
Defines the settings for a new drawing. Start from Scratch creates a new drawing
using either imperial or metric default settings. Use a Template creates a new
drawing using the settings defined in a drawing template you select. Use a
Wizard creates a new drawing using the settings you specify in either the
Quick or Advanced wizard. (The first option, Open a Drawing, is not available
from the NEW command. To open an existing drawing, use OPEN.)
Create New Drawing Dialog Box | 727
To Next Page
Loading...