Diameter
Creates a series of diameter dimensions.
Datum Point
Sets a new datum point for baseline and ordinate dimensions.
Select new datum point: Specify a point
The program returns to the previous prompt.
Edit
Edits a series of dimensions. You are prompted to add or remove points
from existing dimensions.
Indicate dimension point to remove, or [Add/eXit] <eXit>: Specify a point, enter
a , or press ENTER to return to the previous prompt
Settings
Sets the default object snap for specifying extension line origins. The
following prompt is displayed:
Associative dimension priority [Endpoint/Intersection]
The program returns to the previous prompt.
QLEADER
Creates a leader and leader annotation
Dimension toolbar:
Dimension menu: Leader
Command line: qleader
Use QLEADER to quickly create leaders and leader annotation. You can use
the Leader Settings Dialog Box to customize the command so that it prompts
you for the number of leader points and the annotation type suited to your
drawing needs. You can use QLEADER to
■ Specify leader annotation and annotation format
■ Set the location where leaders attach to multiline text annotation
938 | Chapter 18
To Next Page
Loading...