Autodesk AUTOCAD 2006 - Page 856

View
Loads the geometry from the specified view into the current drawing.
Enter view to load or [?] <*Extents*>: Enter a view name, enter ? , or press ENTER
to load the Extents view
View to Load
Loads the geometry from the specified view into the partially open drawing.
Enter layers to load or [?] <none>: Enter a layer name, enter ? , or press ENTER
Layers to Load
Loads geometry from the layer or layers into the current drawing. To load
geometry from multiple layers into the drawing, use a comma between layer
names. If no layer geometry is specified, no layer geometry is loaded into
the drawing, including geometry specified to load from a view.
Unload all Xrefs on open [Yes/No] <Yes>: Enter y or n , or press ENTER
If you enter yes, no external references are loaded into the drawing. If you
enter no, all external references are loaded into the drawing.
?—List Layers
Displays a list of layer names available in the current drawing. Enter one
or more layer names. If no layer geometry is specified, no layer geometry
is loaded into the drawing, including geometry specified to load from a
view.
Unload all Xrefs on open [Yes/No] <Yes>: Enter y or n , or press ENTER
If you enter yes, no external references are loaded into the drawing. If you
enter no, all external references are loaded into the drawing.
?—List Views
Displays a list of model space views available in the selected drawing. Enter a
view name.
Enter layers to load or [?] <none>: Enter a layer name, enter ? , or press ENTER
Layers to Load
Loads geometry from one or more layers into the current drawing. To load
geometry from multiple layers into the drawing, use a comma between layer
names. If no layer geometry is specified, no layer geometry is loaded nto
the drawing, including geometry specified to load from a view.
Unload all Xrefs on open [Yes/No] <Yes>: Enter y or n , or press ENTER
832 | Chapter 17