AVANIT SXHD - Channel Selection Methods

Basic Operation
AVANIT SXHD 99
received signal. Time zone is set to GMT + 1 hour (+ 1:00) by default. Required
changes can be made in the sub-menu Time:
1. Select the menu System Setup (see above).
2. Select the sub-menu Time and confirm by pressing OK.
3. Select the item GMT Usage and switch on or off GMT Usage by using the
keys / or / .
On = automatic time setting via satellite signal is activated.
Off = automatic time setting via satellite signal is deactivated.

It’s recommended to keep the presetting
(GMT Usage On).
4. Select the item GMT and select your time zone by using the keys / or
/ ; for example, the time zone of Germany, Austria and Switzerland is
GMT +1:00.
5. Select the item Summer Time and switch Summer Time Off or On by using
the keys / or / .

 Please verify the presetting and correct them, if required.
Please also consider corresponding change of those set-
tings.
6. If automatic time setting (GMT Usage) is switched off, then date and time
should be manually entered:
For this, select the item Date, select the position to be changed by using the
keys / or / , and enter the current date by using the numeric
keys. Then, select the item Time, select the position to be changed by using
the keys / or / , and enter the current time by using the nu-
meric keys.
7. Leave the menu by pressing EXIT until the screen shows the TV picture.
5.8 TV
You have several possibilities to select a channel:
• Direct channel selection;
• Channel selection via selection window; and