What to do if my AVANIT Receiver states "OFF" and the red LED lights up?
If your AVANIT Receiver displays "OFF" and a red LED is lit, it's likely in standby mode. To resolve this, simply press the POWER button to turn the receiver on.
How to play back recorded content from USB storage devices.
Using the timeshift function to pause and resume live TV broadcasts.
Displays properties of connected USB data storage and formatting options.
Settings for PVR functions like timeshift and recording modes.
Instructions for updating the receiver's software via USB or satellite.
Details on the front and rear panels of the AVANIT SXHD receiver.
Explanation of all buttons and functions on the remote control.
Information on potential hazards, electrical safety, and proper handling.
Safety advice on device placement, ventilation, and battery handling.
Diagram and steps for connecting antennas, TV, and other devices.
Guidance on connecting external USB storage devices for PVR functionality.
Steps for initial receiver setup, language selection, and automatic channel scanning.
Methods for selecting channels: direct, window, and search functions.
Navigating menus, setting time, parental lock, and adjusting TV settings.
Editing, sorting, renaming, and deleting channels from TV and radio lists.
Playing music, images, and videos from connected storage devices.
Key technical specifications including input, output, and power details.
To Next Page
General