114 AVANIT SXHD
Press the blue L/R key to return to the sub-menu Favorite and press EXIT to
leave the sub-menu.
6.2 Menu Installation
The default settings apply to a standard satellite system. Any further system
functions (e.g. unicable system or motor antenna) should be manually set in the
menu Installation:
CAUTION!
In case of doubt, have those settings being made by an
expert. Usually, there are no required settings within
scope of normal use of the system.
6.2.1 Antenna Connection
1. In the menu Installation, select the submenu Antenna Connection and
confirm by pressing OK.
2. Select by using the keys / and / if a Fixed Antenna or a Motor
Antenna is connected to the receiver.
3. Press EXIT to leave the submenu Antenna Connection.
4. Press EXIT again to leave the menu Installation and to return to TV opera-
tion, or go to another submenu.
If you selected a Motor Antenna, then such antenna should
be further configured at the menu item Antenna Setup.
6.2.2 Satellite List
The submenu Satellite List states a preset list of possible satellites. Depending
on your antenna system you can select the satellites used for receiving channels:
1. In the menu Installation, select the submenu Satellite List and confirm by
pressing OK
2. Select the satellite you want to receive by pressing the keys / PR+ and
/ PR-, and confirm by pressing OK.
The selected satellite will be correspondingly marked ( ).
To Next Page
Loading...