AVANIT SXHD - Audio Settings; Teletext

Basic Operation
AVANIT SXHD 107
 Press the red function key to
access the window Time:
 Here, select the function on the
bottom by using the keys
/ and / :
 Press OK when is selected to go to the current program. The current
program is marked with .
 Press OK when is selected to go one program forward or back.
 Press OK when is selected to go two hours forward or back.
 Press OK when is selected to go one day forward or back.
 Press OK when is selected or press EXIT to close the window Time and
to return to the EPG window.
 Press the blue function key to leave the EPG window and return to the
window Single EPG.
 Press the EXIT key to leave the EPG window and return to the TV program.
5.8.6 Audio Settings
1. Press the key AUDIO.
2. Select the audio mode by using the keys / and / .
Depending on the selected channel and the current program, the following
modes are available: Left - Right - Stereo - Mono.
3. Press the keys / PR+ or / PR- to select another language or Dolby AC3
(Dolby Digital) as far as provided by the TV station.
4. After selecting the desired audio mode, leave the menu by pressing the EXIT
key.
5.8.7 Teletext
Teletext is an information system displayed on your TV set. Teletext is only pos-
sible if the selected channel supports such function.
 Press the TXT key to activate teletext.
 Press the EXIT or TXT key to deactivate teletext.