AVANIT SXHD - Timer Setting

22 AVANIT SXHD
5 Timer Setting
This sub-menu can be used to program, edit and delete up to eight different record-
ings (or channel switches).
1. In the sub-menu Timer Setting, mark a timer by using the keys / PR+ and /
PR-.
2. Press the OK key to open the timer.
3. Mark the line Timer Mode by using the keys / PR+ and / PR-.
4. You can select from the following possibilities by using the keys / and
/ :
Value Meaning
Off
The timer is deactivated.
Once
Recording of a single program.
Daily
Recording every day at the same time (e.g. the news program every
day)
5. Mark the line Timer Service by using the keys / PR+ and / PR-.
You can select from the following possibilities by using the keys / and
/ :
Value Meaning
Record
The programmed program will be recorded on the USB data storage.
Channel
The programmed program will be displayed on the screen, but
NOT
recorded.
6. Mark the line Wakeup Channel by using the keys / PR+ and / PR-, and
select the channel to be recorded or displayed by using the keys / and
/ .
7. Mark the line Wakeup Date by using the keys / PR+ and / PR-, and enter
the date by using the numeric keys.
8. Mark the line On Time by using the keys / PR+ and / PR-, and enter the on
time by using the numeric keys.
9. Mark the line Duration by using the keys / PR+ and / PR-, and enter dura-
tion of the program by using the numeric keys.