You can go from letter to letter (position to position) in the date
and time fields by pressing the keys / and / .
10. Mark the line PS Record by using the keys / PR+ and / PR-, and enter
whether recording should be made in PS format or not.
No: TS - Transport Stream (additionally records EPG and TXT)
or
OK: PS - Program Stream (only program).
TS format is set by default. Recordings in PS format are only
possible in SD
2
quality, but allow for easier editing.
11. Mark the button Save by using the keys / PR+ and / PR-, and confirm by
pressing OK (or select Cancel and confirm by pressing OK if you want to cancel
programming – then you will return to the sub-menu Timer Setting).
You can directly add programs marked in EPG to the
timers. This significantly facilitates programming as you do not
have to make settings for channel, date and time.
2
SD = Standard Definition, HD = High Definition
To Next Page
Loading...