cleaning the receiver!
Do not use solvent-containing cleaning agents like petroleum
ether or thinner.
Clean the housing of the receiver using a dry cloth.
9 Transport and Decommissioning
Proceed as follows if you want to transport the receiver of if you do not
want to use the receiver any more:
1. Disconnect the receiver and all connected devices from power supply.
2. Disconnect any cables connected to the receiver.
3. Remove the batteries from the remote control.
4. Put receiver, cables and remote control into the original packaging.
5. Store the receiver and the accessory parts at a dry and dust-free location.
6. Protect the receiver from freeze.
10 Troubleshooting
This section includes a list of general errors that could occur with operation of
the receiver. Each error states a possible cause and solutions.
To Next Page
Loading...