ACLI commands ACLI mode
show logging informational sort-reverse unit <1-8>
show logging informational unit <1-8>
show logging serious
show logging serious sort-reverse
show logging serious sort-reverse unit <1-8>
show logging serious unit <1-8>
show logging sort-reverse
show logging unit <1-8>
show mac-address-table
show mac-address-table address <mac>
show mac-address-table aging-timer
show mac-address-table port <ports>
show mac-address-table vid <vlan>
show mac-security config
show mac-security mac-address-table
show mac-security mac-address-table address <mac>
show mac-security mac-da-filter
show mac-security pots>rt
show mac-security port <ports>
show mac-security security-list
show mac-security security-list <ports>
show memory-utilization Config, PrivExec, Exec
show memory-utilization unit <1-8>
show mlt show mlt <mlt-id> Config, PrivExec
show mlt shutdown-ports-on-disable
show mlt spanning-tree <mlt-id>
show mlt utilization <mlt-id>
show nvram block Config, PrivExec, Exec
show password password-history
show password security
show poe-main-status Config, PrivExec
ACLI quick reference
100 Fundamentals December 2011
Comments? infodev@avaya.com
To Next Page
Loading...
