Figure 12: Interface tab - Multiple Port Configuration pane collapsed
Changes you make to a port configuration using Multiple Port Configuration are applied to the
switch configuration only after you click Apply on the work area toolbar.
The following figure displays the location of the Apply button on the work area toolbar.
Figure 13: Toolbar Apply button
Enterprise Device Manager procedures
About this task
This section contains procedures for starting and using Enterprise Device Manager (EDM) on
your switch. You can use EDM software on the switch; there is no need to install any client-
based application on your PC.
User interface fundamentals
36 Fundamentals December 2011
Comments? infodev@avaya.com
To Next Page
Loading...
