Procedure
1. In a supported Web browser, enter the IP address of the switch using one of the
following formats:
•
http://<IP Address>
•
https://<IP Address>
2. Enter the user name.
3. Enter the password.
4. Click Log On.
Using shortcut menus
About this task
In the EDM Device Physical View you can use shortcut menus to edit objects and apply
changes.
Procedure
1. In the Device Physical View, select an object.
2. Right-click the object.
3. Select a function from the list.
Variable Definitions
Field
Description
Unit
Edit Displays the Edit unit dialog box and tabs.
Refresh Status Refreshes switch status.
Refresh PoE Status Refreshes the PoE status only to units
equipped with Power over Ethernet.
Refresh Port Tooltips Refreshes the port tooltip data. Port tooltip
data contains: Slot/Port, PortName, and
PortOperSpeed.
Identify Unit Identifies the switch units.
Enterprise Device Manager procedures
Fundamentals December 2011 39
To Next Page
Loading...
