Deleting an entry from a dialog box
About this task
Use the following procedure to delete an entry from a dialog box.
Procedure
1. Highlight the entry.
2. Click Delete.
Editing objects
You can edit objects in the Device Physical View from the navigation tree or the shortcut menu.
Changes are not applied to the running configuration until you click Apply.
Editing an object using the shortcut menu
About this task
Use the following procedure to edit an object using the shortcut menu.
Procedure
1. On the Device Physical View, you can
• right click an object
• press Ctrl+click to select several objects; then right click
• click and drag to select a group of objects; then right click
• click an entire device; then right click
2. From the list, click Edit.
3. Edit the applicable tab in the work area.
4. Click Apply.
Editing file system elements
About this task
Use the procedure and job aid in this section to edit file system elements.
User interface fundamentals
44 Fundamentals December 2011
Comments? infodev@avaya.com
To Next Page
Loading...
