Deleting a license
About this task
Delete an installed license file using the command clear license { <1-10> | all} in
Privileged Exec mode. Specify an individual license with the designated number or use the all
keyword to delete all installed licenses.
License transfer
About this task
The Avaya Ethernet Routing Switch 4000 implements Licensing Auto Unit Replacement. If a
base unit fails, the other units in the stack will transfer a virtual key to the new base unit to
eliminate the need for transfer of a license to the new base unit. Even with this functionality in
place, there are still several situations where it becomes necessary to transfer the license from
one device to another. These conditions are as follows:
• replacement of failed non base unit
• incorrect MAC address entered during license file generation
• the system displays an error message indicating the limit of MAC swaps for the license
has been exceeded
Use the following procedure to transfer a license.
Procedure
1. Use a web browser to access the licensing portal.
2. Click License Bank.
3. Enter the appropriate user name and password.
4. Select the License Authorization Code (LAC) entry associated with the license
type.
5. Click View Details.
6. Select the transaction that contains the appropriate license file name.
7. Click Replace Switch.
8. In Step 1: Enter Replacement MAC Address, enter the new MAC address.
9. In Step 2: Select the MAC Address to Replace, select the entry for the MAC
address to be replaced.
10. Click Replace Switch MAC.
Deleting a license
Fundamentals December 2011 17
To Next Page
Loading...
