Avaya 4550T-PWR+ - Page 52

Prerequisites
• An available TFTP server— ensure that the TFTP path differs from the path you use to
download switch software, or
• A USB mass storage device and switch equipped with a USB port
Caution:
Do not install EDM help files on PCMCIA or Flash.
Procedure
1. To obtain EDM help files for the embedded element manager, do one of the
following:
• Go to the Avaya Web site http://support.avaya.com and locate the help files
for the appropriate product.
• Select the help file from the software CD ROM.
2. Do one of the following:
• Download the help file to a TFTP server.
• Download the help file to a USB mass storage device.
3. Unzip the help file in the TFTP server directory.
Configuring the path to the help files using ACLI
About this task
Use the following procedure to configure the path to the help files.
Procedure
1. Open an ACLI session.
2. Enter the Global Configuration mode.
3. At the command prompt, enter the following ACLI command:
edm help-file-path <path name> <tftp address | usb>
<filename>
Variable Definitions
Field
Description
path name Specifies the path name you created for
EDM help files. The path name is stored in
NVRAM.
User interface fundamentals
52 Fundamentals December 2011
Comments? infodev@avaya.com