Avaya 4550T-PWR+ - Page 62

Storing current ASCII configuration on a TFTP server using EDM
Procedure
1. From the navigation tree, double-click Edit to open the Edit tree.
2. Click File System.
3. Click the Ascii Config Script Files tab.
4. Double-click the ScriptSource field and type the TFTP server address and the
configuration file name in this format: tftp://<ip address>/<filename>. The
entry is limited to a maximum of 327 characters.
5. Double click the ScriptManual field and then choose Upload from the list.
6. On the toolbar, click Apply.
Storing current ASCII configuration on a SFTP server using EDM
Procedure
1. From the navigation tree, double-click Edit to open the Edit tree.
2. Click File System.
3. Click the Ascii Config Script Files tab.
4. Double-click the ScriptSource field and type the SFTP server address and the
configuration file name in this format: sftp://<ip address>/<filename>. The
entry is limited to a maximum of 327 characters.
5. Double click the ScriptManual field and then choose Upload from the list.
6. On the toolbar, click Apply.
Storing current ASCII configuration on a USB device using EDM
Procedure
1. From the navigation tree, double-click Edit to open the Edit tree.
2. Click File System.
3. Click the Ascii Config Script Files tab.
4. Double-click the ScriptSource field and type usb://<filename> to store the
configuration file on a USB device in a stand-alone unit or usb://<unit
Configuration files fundamentals
62 Fundamentals December 2011
Comments? infodev@avaya.com