Avaya 4550T-PWR+ - Page 65

Storing a binary configuration file on a TFTP server using EDM
Procedure
1. From the navigation tree, double-click Edit.
2. Click File System.
3. Click the Config/Image/Diag file tab.
4. In the TftpServerInetAddressType dialog, click the applicable address type
button.
5. In the TftpServerInetAddress field, enter the TFTP server IP address.
6. In the BinaryConfigFilename field, enter the configuration file name.
7. In the BinaryConfigUnitNumber field enter the stack unit number or, for a stand-
alone switch, enter 0.
8. In the Action box, select upldConfig.
9. On the toolbar, click Apply.
Storing a binary configuration file on a USB device using EDM
Procedure
1. From the navigation tree, double-click Edit .
2. Click File System.
3. Click the Config/Image/Diag file tab.
4. In the BinaryConfigFilename field, enter the configuration file name.
5. In the BinaryConfigUnitNumber field enter the stack unit number or, for a stand-
alone switch, enter 0.
6. In the UsbTargetUnit field, enter the stack number where the USB device is
inserted.
7. In the Action box, click the upldConfigtoUsb button.
8. On the toolbar, click Apply.
Enterprise Device Manager configuration files
Fundamentals December 2011 65