Command Purpose
[no][default] ip igmp mrouter
<portlist>
Configure/remove multicast forwarding ports
per VLAN.
[no][default] ip igmp proxy Enable/disable IGMP proxy.per VLAN.
[default] ip igmp query-max-
response
Configure/restore to default max response
time in query message (1/10 of a second).per
VLAN.
[default] ip igmp query-
interval<1–65535>
Configure/restore to default query interval
time per VLAN, in seconds.
[default] igmp robust-value
<2–255>
Configure/restore to default robustness
variable per VLAN.
[no][default] ip igmp router—
alert
Configure to accept/ignore IGMP packets
with router-alert option in IP header, per
VLAN.
[no][default] ip igmp
snooping
Enable/disable IGMP snooping per VLAN.
ip igmp version <1–3> Set/restore to default IGMP protocol
version.
show ip igmp cache Display IGMP cache details
show ip igmp group count Display the count of entries.
show ip igmp group count group
<A.B.C.D>
Display the count of entries for the specified
group.
show ip igmp group count
member-subnet <A.B.C.D/<0–
32>>
Display the count of entries for the specified
member subnet
show ip igmp group group
<A.B.C.D>
Display the IGMP group details for the
specified group.
show ip igmp group member-
subnet <A.B.C.D>/<0–32>
Display the IGMP group details for the
specified member subnet.
show ip igmp group member-
subnet <A.B.C.D>/<0–32> group
<A.B.C.D>
Display the IGMP group details for the
specified member subnet from the selected
group.
show ip igmp group-ext Display the IGMP group extended details.
show ip igmp group-ext count Display the count of entries for IGMP group
extended details
show ip igmp group-ext group
<A.B.C.D>
Display the IGMP group extended details for
the selected group.
ACLI quick reference
78 Fundamentals December 2011
Comments? infodev@avaya.com
To Next Page
Loading...
