Avaya 4550T-PWR+ - Page 90

ACLI commands ACLI mode
qos Config
quickconfig start-recording Config, PrivExec
radius Config
radius-server Config
reload Config, PrivExec
reload cancel
reload force
reload force minutes-to-wait <1-60>
reload minutes-to-wait <1-60>
renumber unit
restore factory-default Config, PrivExec
restore factory-default -y
rmon Config
route-map Config
router Config
save config Config, PrivExec
script run <1-127> Config, PrivExec
script run tftp <ip><filename>
script run unit <1-8> usb <filename>
script run usb <filename>
script upload <1-127>
serial-console enable Config
serial-console unit <1-8> enable
no serial-console enable
no serial-console unit <1-8> enable
default serial-console enable
default serial-console unit <1-8> enable
serial-security enable Config
no serial-security enable
default serial-security enable
show adac Config, PrivExec
ACLI quick reference
90 Fundamentals December 2011
Comments? infodev@avaya.com