Page 14 - Overview of the Feature Key Feature Key
CPark - Call Park
Parks the current call. This function can be programmed with or without data. In both
cases, when a call is parked P is displayed. Parked calls are retrieved with the Ride
function (set under another dial pad digit - see page 28).
If programmed with data the number assigned to the parked call is displayed on
retrieval.
If programmed without data, calls parked are assigned a number based on the parking
extensions number. For example, extension 290's first parked call is numbered 2900,
its next 2901 if 2900 is still parked and so on. Pressing
Feature and then the
relevant dial pad digit again displays the user's parked calls and allows them to be
retrieved.
If not retrieved elsewhere, a parked call will recall to the parking extension after a set
time.
[User | Digital Telephony | Emulation | Call Park]
See also:
• Park - Park on page 23.
• Park - Call Park to Other Extension on page 24.
• Ride - Ride Call on page 28.
CPkUp - Call Pickup
Answer a call ringing elsewhere on the telephone system.
This function does not require any data entered when programmed.
Pressing
Feature and then the relevant dial pad digit answers (pickup) any call
currently ringing on the telephone system.
Note: It is recommend that this function is only used on systems with a small number
of users all in one area. Use of this function on larger system may lead to
confusion.
[User | Digital Telephony | Emulation | Call Pickup]
See also:
• PickA - Call Pickup Any on page 25.
• PickG - Call Pickup Group on page 25.
• PickM - Call Pickup Members on page 25.
CWOn - Call Waiting On
Switches call waiting for the extension on/off.
This function is not currently supported on the 5402.
CWOff - Call Waiting Off
Switches call waiting for the extension off.
This function is not currently supported on the 5402.
CWSus - Call Waiting Suspend
Suspend the current call at the exchange and answer the waiting call. This function is
not supported in the USA.
If no slot number is specified when the function is programmed, exchange slot 0 is
used. CWSus is only supported if the exchange provides a Q.931 suspend call facility.
[User | Digital Telephony | Advanced | Call | Call Waiting Suspend]
• See also: Resum - Resume Call on page 27.
Page 14 - Feature Key IP Office (R3.0) 5402 User’s Guide
Overview of the Feature Key 40DHB0002UKFC – Issue 1 (5th February 2005)
To Next Page
