Page 22 - Overview of the Feature Key Feature Key
ICSeq - Set Inside Call Sequence
Sets the ringing pattern (sequence) used for internal calls.
This function is currently not supported on the 5402 telephone.
IDial - Dial Intercom
The same as IAuto - Automatic Intercom on page 21.
[User | Digital Telephony | Emulation | Dial Intercom]
Inclu - Dial Inclusion
Intrudes on a call in progress at the target extension.
This function is currently not supported on the 5402 telephone.
Intru - Call Intrude
Intrudes on a call in progress at the target extension, creating a conference between
the callers and the intruding extension.
This function requires entry of the target extension number when programmed.
Pressing
Feature and then the relevant dial pad digit intrudes on the call in
progress.
Note: That the System Administrator must configure the intruding extension as being
able to intrude. Additionally none of the other extensions involved in the call
can have "Cannot be intruded on" status.
[User | Digital Telephony | Advanced | Call | Call Intrude]
Listn - Call Listen
Allow the extension to listen to groups calls to the target extension. The call parties
cannot hear the listening extension.
This function requires entry of the target extension number when programmed.
Use of this function requires setup of the extension's monitor group by the System
Administrator. This function requires the telephone system to have some free
conference capacity when invoked.
[User | Digital Telephony | Advanced | Call | Call Listen]
See also:
• Intru - Call Intrude on page 22.
• Recor - Call Record on page 26
• Steal - Call Steal on page 29.
Login - Extn Login
Logs the current user onto the extension.
This function is currently not supported on the 5402 telephone.
Logof - Extn Logout
Logs the current user off the extension.
This function is currently not supported on the 5402 telephone.
Page 22 - Feature Key IP Office (R3.0) 5402 User’s Guide
Overview of the Feature Key 40DHB0002UKFC – Issue 1 (5th February 2005)
To Next Page
Loading...
