Avaya 5402 - Park - Call Park to Other Extension; Pcall - Priority Call; Phyex - Dial Physical Extension by Number; Picka - Call Pickup any

Page 24 - Overview of the Feature Key Feature Key
Park - Call Park to Other Extension
Allows a call to be parked against another extension. Depending on the other
extension's type, its parked call indication is triggered. Parked calls are retrieved with
the Ride function.
This function can be programmed with or without a target extension number.
After answering a call, pressing
Feature and then the relevant dial pad digit parks
the call against that extension.
If programmed without a number, after pressing
Feature and then the relevant
dial pad digit the target for the parked call must be entered.
The parked call is assigned a number based on the parking extensions number. For
example, extension 290's first parked call is numbered 2900, its next 2901 if 2900 is
still parked and so on.
To retrieve a parked call, use Ride under Feature and a dial pad digit. If not retrieved
elsewhere, a parked call will recall to the parking extension after a set time.
[User | Digital Telephony | Emulation | Call Park to Other Extension]
See also:
• CPark - Call Park on page 14.
• Ride - Ride Call on page 28.
PCall - Priority Call
Call a specified target extension even if that extension is set to 'Do not Disturb'.
This function requires the target extension number to be specified when programmed.
Pressing
Feature and then the relevant dial pad digit initiates a call to the
specified extension.
[User | Digital Telephony | Advanced | Call | Priority Call]
PhyEx - Dial Physical Extension by Number
Dial a specified extension regardless of the current logged on user at that extension
and any forwarding, follow me and do not disturb settings applied by the extension
user.
This function requires the target extension number to be specified when programmed.
This function is currently only available on US based systems.
[User | Digital Telephony | Dial | Dial Physical Extension by Number]
PickA - Call Pickup Any
Pickup any ringing call.
This function does not require any data entered when programmed.
Pressing
Feature and then the relevant dial pad digit answers any call currently
ringing on the telephone system.
Note: We recommend that this function is only used on systems with a small number
of users all in one area. Use of this function on larger system may lead to
confusion.
[User | Digital Telephony | Advanced | Call | Call Pick Up Any]
See also:
• CPkUp - Call Pickup on page 14.
• DPkUp - Directed Call Pickup on page 16.
Page 24 - Feature Key IP Office (R3.0) 5402 User’s Guide
Overview of the Feature Key 40DHB0002UKFC – Issue 1 (5th February 2005)