Overview of the Feature Key Feature Key - Page 23
Music - Hold Music
Plays the telephone system's music on hold.
This function does not required any data to be entered when programmed.
Pressing
Feature and then the relevant dial pad digit plays the telephone system's
music on hold through the extension.
[User | Digital Telephony | Advanced | Hold | Hold Music]
NATim - Set No Answer Time
Sets the extension's no answer time after which ringing calls are forwarded or go to
voicemail.
This function requires the time in seconds to be entered when programmed.
Pressing
Feature and then the relevant dial pad digit sets the extension's busy
wrap up time to the indicated number of seconds. This time is used to set a delay
between ending one call and the next call ringing the extension (the waiting call may be
indicated on the display however).
[User | Digital Telephony | Advanced | Set | Set No Answer Time]
See also:
• WUTim - Set Wrap Up Time on page 30.
OCSeq - Set Outside Call Sequence
Sets the ringing pattern (sequence) used for internal calls.
This function is currently not supported on the 5402 telephone.
Page - Page
Page the specified target extension or group. The target must be capable of hands-free
speech.
This function requires the target extension or group number to be specified when
programmed. The target is then shown next to Page.
[User | Digital Telephony | Advanced | Dial | Dial Paging]
See also:
• FwNOn - Forward On No Answer On on page 18.
Park - Park
Park calls to a specific park slot. The feature requires a slot number to be entered
when programmed.
Pressing
Feature and then the relevant dial pad digit parks an active. To retrieve
a parked call from the specified slot, the user can retrieve the parked call by using
Feature and then the relevant dial pad digit again. The Ride function can also be used
to retrieve calls parked to a specified slot, which must also have a park slot number
specified when programmed.
[User | Digital Telephony | Advanced | Call | Park Call]
See also:
• CPark - Call Park on page 14.
• Park - Call Park to Other Extension on page 24.
• Ride - Ride Call on page 28.
IP Office (R3.0) 5402 User’s Guide Feature Key - Page 23
40DHB0002UKFC – Issue 1 (5th February 2005) Overview of the Feature Key
To Next Page
Loading...
