Avaya 5402 - DNDX - Do Not Disturb Exception Delete; Dpkup - Directed Call Pickup; Drop - Drop; Dtone - Secondary Dial Tone

Page 16 - Overview of the Feature Key Feature Key
DNDX - Do Not Disturb Exception Delete
Removes the specified number from the extension's ‘do not disturb’ exception list.
This function requires entry of the calling number when programmed.
Pressing
Feature and then the relevant dial pad digit removes the set number
from the extension's do not disturb exception list. That number can then call the
extension and transfer calls to the extension even when the extension is in do not
disturb mode.
[User | Digital Telephony | Advanced | Do Not Disturb | Do Not Disturb
Exception Del]
See also:
• DNDX+ - Do Not Disturb Exception Add on page 15
DPkUp - Directed Call Pickup
Answer a call currently ringing at a specified user or group.
This function can be programmed with or without a target extension or group number.
If programmed with a target extension/group number, then pressing
Feature and
then the relevant dial pad digit enables you to pickup the ringing call.
If programmed without a target number, pressing
Feature and then the relevant
dial pad digit displays DPkUp against a call appearance key. Pressing the DPkUp key
and entering the target number allows the user to pickup the call.
[User | Digital Telephony | Emulation | Directed Call Pickup]
Drop - Drop
Clears a current calls. Temporarily pauses the ringing of an incoming call.
This function does not require any data entered when programmed.
For an incoming call ringing the extension, pressing
Feature and then the relevant
dial pad digit switches off the ringing for a few seconds before ringing again.
Note: If the timers for forwarding or diversion to voicemail expire during the silent
period, those actions will occur without the call ringing at the extension again.
For a call in progress, pressing
Feature and then the relevant dial pad digit
disconnects the caller.
When drop is used, silence is returned to the user rather than dial tone. This is
intended operation, reflecting that Drop is mainly used by call center headset users.
[User | Digital Telephony | Emulation | Drop]
DTone - Secondary Dial Tone
Return secondary dial tone to the user.
This function does not require any data entered when programmed.
Pressing
Feature and then the relevant dial pad digit gives the user dial tone.
They can then dial the telephone number they require.
This function is not available or supported on all local exchanges/central offices,
consult your Service Provider.
[User | Digital Telephony | Advanced | Dial | Secondary Dial Tone]
Emrgy - Dial Emergency
Dials a specified number regardless of any call barring applied to the user.
This function is currently not supported on the 5402 telephone.
Page 16 - Feature Key IP Office (R3.0) 5402 User’s Guide
Overview of the Feature Key 40DHB0002UKFC – Issue 1 (5th February 2005)