Avaya 5402 - Relay - Relay Pulse; Rely+ - Relay on; Rely- - Relay off; Resum - Resume Call

Overview of the Feature Key Feature Key - Page 27
Relay - Relay Pulse
Pulse the specified external output relay (1 or 2) on for 5 seconds.
This function requires the relay switch (1 or 2) on the telephone system to be entered
when programmed.
Pressing
Feature and then the relevant dial pad digit switches the specified relay
on for 5 seconds and then off.
[User | Digital Telephony | Advanced | Relay | Relay Pulse]
Rely+ - Relay On
Switch the specified external output relay (1 or 2) on.
This function requires the relay switch (1 or 2) on the telephone system to be entered
when programmed.
Pressing
Feature and then the relevant dial pad digit switches the specified relay
on.
[User | Digital Telephony | Advanced | Relay | Relay On]
Rely- - Relay Off
Switch the specified external output relay (1 or 2) off.
This function requires the relay switch (1 or 2) on the telephone system to be entered
when programmed.
Pressing
Feature and then the relevant dial pad digit switches the specified relay
off.
[User | Digital Telephony | Advanced | Relay | Relay Off]
Resum - Resume Call
Resume a call previously suspended into a specified ISDN exchange slot. This function
is not supported in the USA.
This function requires the exchange slot number to be specified when programmed.
Pressing
Feature and then the relevant dial pad digit resumes any call previous
suspended into the specified exchange slot. Suspended calls can be resumed by any
extension.
[User | Digital Telephony | Advanced | Call | Resume Call]
See also:
• SusCW - Suspend CW on page 29.
• Suspe - Suspend Call on page 29.
Rtriv - Retrieve Call
Retrieve a call previously held into a specified ISDN central office slot and is only
supported if the central office provides a Q.931 hold facility. This function requires the
central office slot number to be specified when programmed.
Pressing Feature and then the relevant dial pad digit retrieves any call previous
held into the specified central office slot. Held calls can only be retrieved by the
extension that put the call on central office hold.
[User | Digital Telephony | Advanced | Call | Retrieve Call]
See also:
• Hold - Hold Call on page 21
IP Office (R3.0) 5402 User’s Guide Feature Key - Page 27
40DHB0002UKFC – Issue 1 (5th February 2005) Overview of the Feature Key