Administering options for the 9608, 9611G, 9621G, and 9641G SIP Deskphones
Issue 1 May 2011 109
SNTPSRVR " " (Null) Used to retrieve date and time via SNTP (in case
of several entries first address always first, etc.).
Zero to 255 characters: zero or more IP Addresses
in dotted decimal or DNS name format, separated
by commas without any intervening spaces.
SPEAKERSTAT 2 Limits the hands-free audio operation mode. Valid
values are:
0=no speakerphone allowed
1=one-way speakerphone operation allowed
(monitor)
2=two-way speakerphone operation allowed
SUBSCRIBELIST " " (Null) String representing the Push subscription list.
Applies to phones running software Release 2.2
only. Values are: 0 to 255 ASCII characters: zero
or more URLs separated by commas without any
intervening spaces.
SUBSCRIBE_SECURITY 2 Controls the use of SIP and SIPS subscriptions.
Valid values are 0 - 2:
If=0, the phone uses SIP for both the Request URI
and the Contact Header regardless of whether
SRTP is enabled.
If=1, the phone uses SIPS for both the Request
URI and the Contact Header if SRTP is enabled
(TLS is on and MEDIAENCRYPTION has at least
one valid crypto suite).
If=2 and the SES/PPM does not show a
FS-DeviceData FeatureName with a
FeatureVersion of 2 in the response to the
getHomeCapabilities request (indicative of SES/
PPM 4.0), the phone uses SIP for both the
Request URI and the Contact Header.
If=2 and the SES/PPM does show a
FS-DeviceData FeatureName with a
FeatureVersion of 2 or greater in the response to
the getHomeCapabilities request, the phone uses
SIPS for both the Request URI and the Contact
Header if SRTP is enabled (TLS is on and
MEDIAENCRYPTION has at least one valid crypto
suite).
SUPPORT_GIGABIT 0 Flag indicating whether the deskphone supports
GigE (Gigabit Ethernet). Valid values are:
0=Telephone does not support GigE
1=Telephone supports GigE
SYMMETRIC_RTP 1 Enforces RTP on the same port. Values are 0 -1.
Parameter Name Default
Value
Description and Value Range
27 of 30
To Next Page
Loading...
