Avaya 9608 - Page 110

Administering Telephone Options
110 Deskphone SIP 9608, 9611G, 9621G, 9641G Administrator Guide Release 6.0.1
SYSTEM_ LANGUAGE " " (Null) System Default Language definition. String
representing a file name (shall be identical to one
of the file names received via LANGUAGES
parameter or null).
TCP_KEEP_ALIVE_
INTERVAL
10 Time interval (number of seconds) after which TCP
keep-alive packets are re-transmitted. The interval
is started by the system TCP/IP stack (when TCP
keep-alive is enabled with specified time intervals).
Values are 5-60 seconds.
TCP_KEEP_ALIVE_
STATUS
1 Indicates whether TCP/IP keep-alive should be
enabled at the system. Values are 0=TCP keep
alive disabled, 1=TCP keep alive enabled.
TCP_KEEP_ALIVE_TIME 60 This time interval is the time 9600 Series SIP IP
Telephones will wait before sending out a TCP
keep-alive message (TCP ACK message) to the
far-end. The time is controlled by the system's
TCP/IP stack. The timer is restarted after
application level data (for example, a SIP
message) is sent over the socket. When the
system is idle, this keep-alive time expires and
results in sending a TCP ACK (keep-alive) packet.
Valid values are 10-3600 (seconds).
TIMEFORMAT 0 Display time according to defined format in the top
line and in the call log. Values are:
0=am/pm format
1=24h format
TLSDIR " " (Null) Path name for https downloads. Character string
of 0 to 127 characters representing a directory
name or path to directory.
TLSPORT 443 Destination TCP port used for requests to https
server during initialization. Values: 0-65535.
TLSSRVRID 1 Flag to indicate if TLS server identification is
required. Valid values are:
0 = no certificate match necessary; TLS/SSL
connection will be established anyway.
1 = certificate match required; TLS/SSL
connection will only be established if the server's
identity matches the server's certificate.
TPSLIST " " (Null) String representing the Trusted push server list.
Applies to phones running software Release 2.2
only. Values are: 0 to 255 ASCII characters: zero
or more domain/path strings, separated by
commas without any intervening spaces.
TRUSTCERTS " " (Null) File names of certificates to be used for
authentication. List of file names separated by
commas (0 to 1024 characters).
Parameter Name Default
Value
Description and Value Range
28 of 30