PARTNER
®
Advanced Communications System Installation, Programming, and Use
Loudspeaker Paging System
9-28
Loudspeaker Paging Line (#617) 9
Use this feature to specify the line jack to which you connected the loudspeaker paging system.
Considerations 9
■ Whenever the Loudspeaker Paging Line is added or changed, the new line is removed from all
Automatic Line Selection lists and pools to which it was assigned. If an extension has a line
appearance button for that line (and no autodial button programmed for I70), the associated
line appearance button is converted to an autodial button for an external page. If the extension
has a line appearance button for that line and an autodial button programmed for I70, the
associated line appearance button is “erased.”
Programming 9
To specify the line to which the loudspeaker paging system is connected:
1. Press
f00ss#617 at extension 10 or 11.
2. At the Line: prompt, enter the two-digit line number of the line jack to which the loudspeaker
paging system is connected.
3. Press
e.
4. Select another procedure, or exit programming mode.
To Next Page
Loading...
