Using Auxiliary Equipment
Voice Messaging Systems
9-47
4. To set VMS Cover Rings for another extension, press
n or p until the extension
number appears on the display. Then repeat Step 3.
5. Select another procedure, or exit programming mode.
VMS Hunt Delay (#506) 9
Use this feature to determine when outside calls should be answered by the Automated Attendant
of the voice messaging system. You can set the system for any number of rings, 0–6. Assigning
more rings gives the operator an opportunity to answer calls before they go to the Automated
Attendant.
VMS Hunt Delay is programmable on a per-line basis. In addition, you can program this feature so
that calls can be handled one way during the day and a different way when the system is in Night
Service.
Considerations 9
■ If you do not subscribe to ICLID services and want immediate call handling, set this option to 0
rings.
■ If you do subscribe to ICLID services and want immediate call handling, set this option to at
least 2 rings. This allows the ICLID information to be detected before the call is sent to the
Automated Attendant.
Programming 9
To change the VMS Hunt Delay setting for the voice messaging system’s Automated Attendant
service:
1. Press
f00ss#506 at extension 10 or 11.
2. Select Day or Night mode by entering
1 or 2 respectively (the factory setting is 1 = Day).
3. Enter the line number.
The current setting is displayed.
4. To set VMS Hunt Delay, press
D until the appropriate value for the number of rings
appears: 0–6 (2 is the factory setting).
5. To set VMS Hunt Delay for another line, press n or p until the line number
appears on the display. Then repeat Step 4.
6. Select another procedure, or exit programming mode.
VMS Hunt Schedule (#507) 9
Use this feature to determine whether the outside lines assigned to Hunt Group 7 hunt through
the VMS Hunt Group all the time, only during Day operation (Night Service is off), or only during
Night operation (Night Service is on). This feature affects only the Automated Attendant service of
the voice messaging system. You can program VMS Hunt Schedule on a per-line basis.
To Next Page
Loading...
