Avaya PARTNER - Page 362

PARTNER
®
Advanced Communications System Installation, Programming, and Use
Voice Messaging Systems
9-48
Considerations 9
■ You must use Hunt Group Extensions (#505) to assign the extensions associated with the
voice messaging system hardware to Hunt Group 7.
■ If you set the VMS Hunt Schedule for Day Only or Night Only, you must use Night Service
Button (#503) to program a Night Service Button for extension 10.
■ When the VMS Hunt Schedule is set to Day Only and Night Service is turned off (in Day
mode), calls coming in on lines assigned to the hunt group are sent to the hunt group. If Night
Service is turned on (in Night mode), incoming calls do not go to the hunt group.
■ When the VMS Hunt Schedule is set to Night Only and Night Service is turned off (in Day
mode), calls coming in on lines assigned to the hunt group are not sent to the hunt group. If
Night Service is turned on (in Night mode), incoming calls go to the hunt group.
Programming 9
To change the VMS Hunt Schedule setting for the voice messaging system’s Automated
Attendant Service:
1. Press
f00ss#507 at extension 10 or 11.
2. Enter the line number.
The current setting is displayed.
3. Press
D until the appropriate value appears:
■ 1 = Always (the factory setting) 
■ 2 = Day Only
■ 3 = Night Only
4. To set VMS Hunt Schedule for another line, press
n or p until the line number
appears on the display. Then repeat Step 3.
5. Select another procedure, or exit programming mode.