Upgrading the System
Upgrading T1 Module Firmware
10-5
Upgrading T1 Module Firmware 10
PARTNER ACS Release 7.0 provides a firmware upgrade capability for the T1 module, which is
equipped with programmable flash memory. The firmware to upgrade this module resides on a PC
Card. This PC Card contains the T1 module firmware upgrade software only. It does not contain
the system software.
The steps to perform a firmware upgrade are the same as those to upgrade the system software.
See “Using a PC Card” on page 10-2.
Once a successful firmware upgrade as been completed, all power LEDs are steady green.
To Next Page
Loading...
