Avaya PARTNER - Centralized Telephone Programming Flow Chart-How to Use

PARTNER
®
Advanced Communications System Installation, Programming, and Use
Centralized Telephone Programming Flow Chart—How to Use
E-10
Centralized Telephone Programming Flow Chart—How to Use
To use the Centralized Telephone Programming Flow Chart, follow these instructions first:
Place the Programming Overlay on the dialpad of the system display phone at extension 10 or 11.
■ To Enter Programming Mode:
— Press
f00
— Press ssc
— Dial the extension number to be programmed. Buttons on to which lines or pools are assigned
light up to show the current Line Ringing setting: remaining buttons can be programmed with
Auto Dial number or features.
■ To Program Another Feature at the Same Extension:
— After you program one feature, continue with the instructions in the box for the next feature.
■ To Change Setting For Another Extension
— Press
c
— Dial the new extension’s number
■ To Erase A Feature or Auto Dial Button:
— Press the programmed button
—Press
!
■ To End Programming Mode:
— Press
f00
= Factory setting
= Button with lights required
= Button with lights recommended

Icon Description