Initial System Programming
Assigning Lines
3-15
■ Line Ringing (Centralized Telephone Programming) to specify when a line or pool starts
ringing at each extension that has the line or pool. Lines are factory-set to Immediate Ring and
pools are factory-set to No Ring.
■ Automatic Line Selection (Centralized Telephone Programming) to specify the order in
which the system selects an available line or pool when a user at the extension lifts the
handset or presses
S to make a call.
For extensions with tip/ring telephones, set Automatic Line Selection to intercom first. This
enables tip/ring telephones to access equipment features, including intercom calling. When
users lift the handsets on tip/ring telephones, they hear intercom dial tone. To access a pool,
they can dial the pool access code 880, 881, 882, or 883 or dial 9 to access the first available
line or pool in the sequence.
To Next Page
Loading...
