Component Number Icon Description
can perform an
orderly shutdown
before power is
turned off. If the
power button is
pressed for more
than 4 seconds, the
system power will
turn off regardless
of the current
operating system
state. If the system
is not running an
ACPI-compliant
operating system,
power is turned off
immediately after
the power button is
pressed.
The power button is
enabled in the System
Setup program. When
disabled, the button can
only turn the system
power on.
The power-on indicator
lights or blinks to indicate
the status of power to the
system.
The power-on indicator
lights when the system is
on. The indicator is off
when the system is off
and power is
disconnected from the
system. The indicator
blinks when the system is
on but in standby state,
or when the system is off
but is still connected to
the power source.
Briefly press the power
button to exit the standby
state.
Table continues…
Hardware overview
12 Deploying Avaya SBCE August 2015
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General