Figure 35: Changing the volume during a call
To change the default speaker volume, perform the procedure in this section.
Procedure
1. To change the default volume settings, access the system's call settings. From the XT
Series web interface, select Basic Settings > Call-Answer mode > General. From the
endpoint's main menu, select Configure > Calling.
Figure 36: Volume Slider
2. Drag the Volume slider to set the value.
3. From the web interface only, select Save.
Related links
Participating in Meetings on page 58
Adjusting the Default Volume Settings
June 2019 Avaya IX Video Conferencing XT Series User Guide 61
Comments on this document? infodev@avaya.com
To Next Page
Loading...
