Procedure
1. Access the call settings. From the XT Series web interface, select Basic Settings > Call-
Answer Mode > General. From the endpoint's main menu, select Configure > Calling.
2. Set Do Not Disturb to Yes.
3. Set DnD Mode to All Except Trusted.
4. From the web interface only, select Save.
Related links
Participating in Meetings on page 58
Using chat
About this task
(Requires chat support) When you are in an Avaya meeting, you can send and receive public (or
private) chat messages to other participants. If multiple users are controlling the same XT Series,
they can use the chat together, but all their messages are sent on behalf of the XT whose name is
shown as associated to their messages.
Chat is also available in the XT web interface.
Important:
If you use Scopia
®
Control to send a private message to someone, you are acting on behalf of
the XT. All the users controlling the same XT as you, via Scopia
®
Control, can see the XT’s
private messages.
Before you begin
Verify the XT Series supports chat (requires version 9.1).
Procedure
1.
In the participants’s panel, tap to access the panel allowing to start or view a chat.
Participating in Meetings
June 2019 Avaya IX Video Conferencing XT Series User Guide 76
Comments on this document? infodev@avaya.com
To Next Page
Loading...
