Figure 54: Set PIN Code
2. Select Basic Settings to set or change the user's PIN code.
3. Enter the current PIN code. The default PIN is 1234.
4. Enter your new 4 digit PIN code, and re-enter if required.
5. From the web interface only, select Save.
Related links
Configuring Advanced User Settings on page 90
Confirming Call Disconnections
About this task
To prevent accidental disconnection from a call, you can configure the system to confirm before a
call is disconnected. By default, calls are disconnected when a participant ends the call, without
requiring a confirmation.
Procedure
1. Access the call settings. From the XT Series web interface, select Basic Settings > Call-
Answer Mode > General. From the endpoint's main menu, select Configure > Calling.
2. Set Confirm Disconnect to Yes.
3. From the web interface only, select Save.
Related links
Configuring Advanced User Settings on page 90
Confirming Call Disconnections
June 2019 Avaya IX Video Conferencing XT Series User Guide 99
Comments on this document? infodev@avaya.com
To Next Page
Loading...
