5. Set Privacy or Video Privacy to Yes.
6. From the web interface only, select Save.
Related links
Participating in Meetings on page 58
Blocking All Incoming Calls (DND)
About this task
If you do not want to answer incoming calls, you can configure the Avaya XT Series to block all
incoming calls by enabling Do Not Disturb (DND).
When the Do Not Disturb feature is enabled:
• The system blocks notifications of incoming calls.
•
The icon appears in the system information area of the monitor display.
• When a remote endpoint calls, the system informs it that you are unavailable and
automatically disconnects the calling endpoint.
You can also temporarily enable Do Not Disturb when receiving an incoming call. To enable, select
Do not disturb on the window which appears when your endpoint rings. To disable, press and
hold
Call on the XT Remote Control Unit or from the endpoint's main menu select Turn off Do
not disturb.
Procedure
1. Access the call settings. From the XT Series web interface, select Basic Settings > Call-
Answer Mode > General. From the endpoint's main menu, select Configure > Calling.
2. Set Do Not Disturb to Yes.
3. Set DnD Mode to Everyone.
4. From the web interface only, select Save.
Related links
Participating in Meetings on page 58
Blocking All Calls Except from Trusted Contacts
About this task
You can configure your XT Series to automatically reject all incoming calls except the ones coming
from your trusted favorite contacts (or numbers). In this way you can block unwanted calls that
may interrupt your work, remaining available for you trusted favorites.
Blocking All Incoming Calls (DND)
June 2019 Avaya IX Video Conferencing XT Series User Guide 75
Comments on this document? infodev@avaya.com
To Next Page
Loading...
