Figure 17: Match Found
4. Click Next.
The XT Series endpoint is configured and the Avaya Equinox Management Mode is set
to Cloud.
Result
If you pre-provision the endpoint and enter a full service code, a blue clock is displayed in the
Equinox Management list, indicating that the XT Series is ready to be provisioned but the code
has not been inserted yet. Once the provisioning is completed, the icon is replaced by the
standard icon.
If you post-provision the endpoint and enter a partial service code, a red clock is displayed in the
Equinox Management list. This is an alert for the Equinox Management administrator to indicate
that the XT Series is ready to be configured.
Related links
Applying basic settings on page 32
Configuring Basic Settings with the Quick Setup Wizard
About this task
To start using your Avaya XT Series, first define basic settings with the quick setup wizard, such
as the system's name, language, and network settings. This is relevant for both new installations,
or after restoring default settings. You can only calibrate the image on the endpoint itself using its
monitor, not from the web interface.
Some settings may already be customized for your organization. If required, ask the system
administrator for the device's password.
The quick setup wizard automatically appears the first time you access the XT Series, either by
turning it on or logging in to the web interface. Alternatively select Configure > Quick Setup from
the Main Menu.
Getting Started
June 2019 Avaya IX Video Conferencing XT Series User Guide 34
Comments on this document? infodev@avaya.com
To Next Page
Loading...
