Figure 48: Layouts
2. Select the desired layout according to the number of participants, or select Auto to restore
the default layout.
3. (For meetings hosted by an external MCU) To change the video layout for all participants
(unless they customized their own layout or are connecting from Avaya Equinox
®
clients):
Use DTMF to issue instructions to the hosting MCU by pressing the XT Remote Control
Unit keypad during the call.
For example, in meetings hosted on the Scopia Elite MCU or the Equinox Conferencing
Media Server, press * to access the MCU menu.
If you are not a moderator, select Become a moderator and enter a PIN if required
followed by #.
Select Change the main video layout to determine all participants' layout.
Related links
Moderating Meetings on page 79
Recording Meetings
About this task
This section describes how to start, pause, or stop a recording during a videoconference.
You can record meetings to a locally connected USB storage device or the network. When
recording to a USB device, you can also save the locally recorded files to an external server for
back-up (if your system administrator has configured one). The external back-up server can be a
generic FTP server or an Avaya Equinox
®
Streaming and Recording Server. The process of
saving a recorded file to an external server could require some time to complete, depending on
Recording Meetings
June 2019 Avaya IX Video Conferencing XT Series User Guide 83
Comments on this document? infodev@avaya.com
To Next Page
Loading...
