Avaya XT Series XT5000 Series XT4000 Series - Chapter 6: Configuring Advanced User Settings; Setting Call Answering Preferences

Chapter 6: Configuring Advanced User
Settings
Important:
You can access the XT Series using a browser (Web UI) or the end point main menu (Graphical
User Interface, GUI). Not all figures in this manual show both interfaces. Some figures show
either the web UI or the end point main menu. The field and menu names on both interfaces are
almost identical.
This section explains how to configure advanced user settings to fit your preferences. For example,
you can set default call settings or recording settings, and secure your unit with PIN codes.
Related links
Setting Call Answering Preferences on page 90
Activating the Screen Saver on page 91
Enabling and Configuring Recording on page 92
Saving Meeting Snapshots (Avaya XTE240 only) on page 97
Setting PIN Codes for the XT Series on page 98
Confirming Call Disconnections on page 99
Configuring Multi-Stream Switching (MSS) video on page 100
Setting Call Answering Preferences
About this task
This procedure describes how to define system behavior for incoming calls. By default, the
endpoint notifies you of an incoming call, so you manually choose to answer it. However, you can
automatically answer calls after a certain number of rings, or automatically answer immediately.
Procedure
1. Access the call settings. From the XT Series web interface, select Basic Settings > Call-
Answer Mode > General. From the endpoint's main menu, select Configure > Calling.
June 2019 Avaya IX Video Conferencing XT Series User Guide 90
Comments on this document? infodev@avaya.com