Figure 43: Blocking your own audio and video
Alternatively you can press the mute key on the XT Remote Control Unit, or if you use
the Microphone Pod, you can press its own mute button. When your audio is muted, the
icon disappears on the display.
2. To block your own video and replace it with a static slide, access the call menu. From the
XT Series web interface, select Privacy from the top bar under the tabs. From the
endpoint, select ok/menu > Privacy Options > Privacy(see Figure 43: Blocking your own
audio and video on page 74). Alternatively, you can remove it from the video layout.
The camera moves to its sleep position when it is disabled, or on the Avaya XTE240 the
embedded camera's LED turns off.
The system sends a placeholder slide to remote participants, and displays the icon on
your display.
Alternatively, you can hide your video. You can choose this preference: From the XT Series
web interface, select Administrator Settings > System > Customization >
General.From the endpoint's in-call menu, select Configure > Advanced > System >
Customization. At the Privacy Options menu, select Hide Video.
3. To block your audio and video and hide your participation in the meeting by removing your
space in participants' video layout, access the in-meeting settings. From the endpoint's in-
call menu, select Meeting Options > Hide Myself.
This feature is only available when your endpoint hosts the meeting on its built-in MCU.
Hide Myself is not available from the web interface.
4. To block your video by default, access the call settings. From the XT Series web interface,
select Basic Settings > Call-Answer Mode > General. From the endpoint's main menu,
select Configure > Calling.
Participating in Meetings
June 2019 Avaya IX Video Conferencing XT Series User Guide 74
Comments on this document? infodev@avaya.com
To Next Page
Loading...
