AVer VC520 Pro - Page 16

8
Name
Function
5. Zoom In/Zoom Out
Increase/Decrease the camera zoom.
6. Preset
1. To save the camera at the desired
position, press and hold the preset
button until the "saved message" is
displayed on the PTZApp video
screen or other video apps. Select
preset position button 0 to 9 to save.
2. Press “preset” + “preset position
button” (0 ~ 9) to move the camera
to the saved position.
7. Preset Position
Preset position buttons are used in
conjunction with the Preset button to
save positions. There are a total of
10 presets.
Press the preset button first and then
press 0~9 for the camera to move to
the saved position.
[Note]
 Press and hold the number button
“ ” to turn the WDR function
on/off.
 Press and hold the number” ”
button for one second to turn the
SmartFrame function on/off.
8. Brightness -
Decrease the brightness.
9. Call/answer*
Answer a call or start a call.
10. Enter
Not supported for VC520 Pro.
11. Mute/Unmute
Speakerphone*
Mute/Unmute the speakerphone.
12. Volume Up/Down*
Adjust volume up or down.
13. Preset Hot Key
Press to move to a preset position
previously set by the user.
14. Brightness +
Increase the brightness.
15. Hang Up*
End the call.
* Function requires AVer PTZApp